Every order is checked at four points, against the proof you approved rather than against a memory of the brief. A defect caught on the press costs a sheet; the same defect caught by a customer costs the project.
1. Artwork check
Before plates are made: bleed, safe area, resolution, colour mode, font embedding, card-back centring and the order of the cards in the file. Anything that would print badly is reported to you rather than corrected silently.
2. Colour check
At the press, against an approved reference. Brand colours, skin tones and large flat areas get particular attention because they are where a shift is visible. Where a brand colour must be exact, a spot colour is used instead of a CMYK build.
3. Finish and cut check
The coating or laminate is even, foil is where it should be, the gilt edge is consistent on all four sides, and the die cut is on the trim line rather than half a millimetre off it. Corners are checked for burrs, which matter as much to how a deck feels as the stock does.
4. Deck and packing check
Card count, card order, the guidebook if there is one, and that the box opens and closes cleanly. Then the carton: quantities, labelling and anything fragile separated so it survives transit. Completed work is kept on file against the approved pre-production sample, which is what makes a reorder identical to the first run.


